Rectangular ductwork design properties is based on width-to-thickness ratios.
2.
Airfoil thickness ratios vary from 6 percent at the root to 3 percent at the tip.
3.
The wing-and tail-thickness ratio was also reduced to increase the critical Mach number.
4.
The thickness distribution for a NACA 4-series aerofoil was used, with a 12 % thickness ratio.
5.
Surface distortion due to grinding or polishing increases with the aspect ratio of the part ( diameter to thickness ratio ).
6.
For thin beams ( beam length to thickness ratios of the order 20 or more ) these effects are of minor importance.
7.
The wing section is an 18 % thickness ratio, much thicker than the typical 12-15 % thickness of normal light aircraft wings.
8.
Whereas earlier masonry domes may have had a radius to thickness ratio of 50, the ratio for modern domes can be in excess of 800.
9.
This makes them one of the thinnest known two-dimensional organic crystalline materials with an area to thickness ratio of greater than 10 9 nm.
10.
Given high length to thickness and low high-competency to low-competency thickness ratios, irregularities in the thickness of the high-competence beds can be accommodated.
मोबाइल